Wormwheel Gearboxes

Shaft to Bore Flange NEMA Flange Miniature

Shaft to Bore

Flange

NEMA Flange

Miniature

       
High Ratio Compact Shafts for Cross Axis  

High Ratio

Compact

Gearbox shafts

 
 

Precision right angle worm gearboxes are manufactured by Ondrives.US in 10 frame sizes and with output torques up to 420Nm.

Worm gear reducers are very compact gear systems that produce an output at 90 degrees to the input. The most popular 90 degree gearbox has a right hand thread. To change the direction of the output, left hand thread worm and wheel gearboxes are routinely supplied.

Most Ondrives.US worm gear reducers are built with ≤30 arc minutes backlash and can be supplied with as low as ≤4 arc minutes backlash.

Our engineers have developed a worm gearbox White Paper “10 Points to consider to get the gearbox you need” to assist you in the selection of the most appropriate wormwheel gearboxes for your application.

“Inertia and the use of inertia figures” gives you an example and a formula for dealing with Inertia in gearbox selection.

Speed Increaser: Ondrives.US standard line of WormWheel Gearboxes should NOT be used as speed increasers.

Contact Ondrives.US application engineers to discuss your wormwheel gearbox application.

Input and output shafts with drive keys and retainer rings can be supplied to your specifications for any of our hollow bore gearboxes. We carry P Series gearbox output shafts designed specifically for wormwheel gear reducers.

Gearbox Shaft DoubleShafts for Cross Axis gearboxes.

Shafts for wormwheel gearboxes.

 

The Ondrives.US Advantage: 30+ years designing and building gearboxes

  • Backlash: 4, 8 or 30 arc-min
  • Single shaft, double shaft or Flange input
  • NEMA mount flanges
  • Rugged worm gear reducers are made to last
  • Greased for life
  • High efficiency right angle worm gear reducers
  • 30 plus years of experience in manufacturing gearboxes
  • Gearboxes are conservatively rated
  • Available - Ingress protection to IP65 or higher
  • Solid aluminum housing
  • Ball bearings on input and output
  • Custom 90 deg gearboxes are available to your specifications

We have a broad selection of Misalignment Shaft Couplings in inch and metric bore sizes for your worm gear box application.

Inch and metric Precision Ground Shafts are available from stock.